1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post AMG vehicles spotted online.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

ownerbuilder
AMG Classic Member
Posts: 23
Joined: Sun May 20, 2012 7:15 pm
CITY: Melbourne
COUNTRY: Australia
Vehicle/s owned: C140 94 S500 Coupe
C126 86 560 Coupe
R107 80 500SL Roadster
C107 79 500SLC 5.0 Coupe

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by ownerbuilder »

Looking at VIN plate says this car originally built as 500SEC. I've asked seller to confirm actual engine number installed in car to see if 560 or 500. Also asked to confirm AMG build number stamp on Header will be in the format of XXX X.X as this will confirm the AMG capacity build of the engine 5.6 or 6.0 as advertised which was missing from listing photos
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

Eyeballing the car, there are some issues that come up that bug the crap out of me.

It is definitely a Gen2 500SEC based on the WDB126044 (not 045) VIN. Started out as a 199 color car.

Engine has a Gen1 vacuum diaphragm, early (but revised) oil blowback system, no stampings on the RHD valve cover, the vacuum advance has a broken rubber connection (see pictured). How is displacement at 6.0 assumed? Based on paperwork? Most Gen1 DOHC motors were 5.0/5.4, a few 6.0's made their way in late Gen1/early Gen2 cars. Also just because it is aGen2 DOHC doesn't mean it is a 6.0, it can also be a 5.6. And whats up with the LHD intake air tube?

The wide body conversion looks good, but there's something about the lines of it that doesn't scream factory AMG. Maybe a later conversion? The car also has the "tucked"narrow rear bumper that was commonplace on non-AMG conversions. Would a real AMG wide body be sent off without an actual widened rear bumper?

Door cards are from a later 89-91 car. Does he have the AMG documentation to accommodate the car? I'd think if he bought it off an owner who owned it the last 30 years, that paperwork would be a definite given.

Also the rear trunk lip spoiler - I don't think I've seen a design like that ever. Nor does it look AMG.

Nice car. But I have some red flags personally.


Image

Image

Ident. number WDB1260441A196262
VIN WDB1260441A196262
Sales name 500 SEC
Order number 0 4 204 03382 (Destination: Branch Bielefeld)
Delivery date 1985-09
PAINT1 199
Interior color 271
Engine 117965 12 000635
Gearbox 722311 02 695546
General data for model code 126044

SA codes
Parameter Value
199 APPLICATION CODE FOR COMPONENT PROCESSING
260 TYPE DESTINATION ON TRUNK LID - ELIMINATION
271A LEATHER ANTHRACITE
406 No code designation available
412 ELECTRIC SLIDING ROOF
506 No code designation available
532 COMAND APS WITHOUT NAVIGATION NTG5/NTG5.5
543 SUN VISOR WITH ADDITIONAL FUNCTION
581 AUTOMATIC AIR CONDITIONER
611 EXIT LIGHTS FOR DRIVER DOORS
673 HIGH-CAPACITY BATTERY
812 REAR-MOUNTED LOUDSPEAKER
873 SEAT HEATER FOR LEFT AND RIGHT FRONT SEATS
Last edited by bondavi on Sun Aug 13, 2017 9:15 am, edited 2 times in total.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

The eBay listing only has exterior body photos. Yes, the panel gaps are a bit inconsistent. And yes, fix the broken vacuum advance and give the engine bay a proper detailing.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

Oh and the front spoiler and rear apron are late model WB, more often seen on the JP examples.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

a JP example that sold earlier this year: http://www.bonhams.com/auctions/23945/lot/92/
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

48hp, if you scroll down and click "See all images" you see the full photo set

https://vmp.ebay.com/ebay/viewAllPhotos ... id=5180980
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

Thanks. For what ever reason the link I posted didn't allow me to see the entire album.

Anyway, yes there are a number of hairs to split on this one.

This engine doesn't have the revised blow-back retrofit nor increase volume modified VC, let alone the late cast VC. This, as is, would suggest a very early DOHC engine, particularly without the VC stamping. Also, the VC appear to be painted.

The instrument cluster is reflective of high humidity environment.

No cruise control.

Aftermarket ground straps over secondary firewall.

Yes, driver's side snorkel...

BBS Steering wheel?

Two tone upper door panel wood.

incorrect rear AMG badge placement...

and....
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

I hate to be the one to say this but IMHO the atrocities in AMG widebody attempts have made the normal SEC AMG coupe looking so much more attractive.

The missteps in body fit, gaps, panels, and the over all look just don't fit. Remember what outsiders perceive as an AMG widebody on paper may not translate into something that LOOKS like an AMG widebody to our well trained eyes here.

Dr Grillz didn't like that Smoke 6.0 widebody - I don't blame him. That car doesn't look right overall to the trained eye.
AMG5PT4
AMG Scientist
Posts: 702
Joined: Mon Mar 12, 2012 12:09 pm
CITY: Atlanta
COUNTRY: USA
Vehicle/s owned: 1984 W126 500SEL AMG
1985 W126 500SEC AMG Widebody
2009 W211 E63 AMG
Location: Atlanta, Georgia

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by AMG5PT4 »

and what is up with the trunk spoiler?

Japan car with no history or provenance. Which is ok if the car looks fully right and properly presented for asking top $. Smart move listing this for 7 day auction just before Monterey car week starts. Hope he gets all the money on this car.
MercedesDad
AMG Classic Member
Posts: 84
Joined: Tue Mar 07, 2017 5:53 am
CITY: Fort Myers
COUNTRY: FL
Vehicle/s owned: 81 W123, 84 500SL AMG, 86 190E 2.3-16V, 93 Viper R/T, 93 300CE, 98 SLK230, 10 ML63 AMG

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by MercedesDad »

Recent incorrect seat upholstering job aside, the gaps tell me that it is very possible we are looking at a fake.

And that trunk spoiler... :(
ownerbuilder
AMG Classic Member
Posts: 23
Joined: Sun May 20, 2012 7:15 pm
CITY: Melbourne
COUNTRY: Australia
Vehicle/s owned: C140 94 S500 Coupe
C126 86 560 Coupe
R107 80 500SL Roadster
C107 79 500SLC 5.0 Coupe

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by ownerbuilder »

Seller confirmed engine # installed in car is 11796812033352 so swapped out at some point. They also confirmed there is no VC stamp confirming engine build # or size.
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

Could *possibly* be a 560 motor cobbled with early 4V heads. The Japanese have been known to do chop suey jobs out there.
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

There was this poor 500SEL in Europe not long ago with an early 5.0/5.4 DOHC that the seller yanked out and tried to resell as a 6.0 DOHC for 6.0 money.

We were used to consistently seeing legit, genuine premerger AMG's out there for a while, but in recent years, has become an spectator's sport identifying the fakes, con jobs, and repros, from the real stuff.

And the real stuff is really small in population, it seems to the proliferating population of fake AMG cars.

Henric's 500SEC is the exception. Its never been labeled an AMG, yet the workmanship in that car is much better than anything out of the AMG factory. It will always be highly regarded.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

bondavi wrote: Henric's 500SEC is the exception. Its never been labeled an AMG, yet the workmanship in that car is much better than anything out of the AMG factory. It will always be highly regarded.
Appreciate the appreciation, thanks bondavi.
AMG5PT4
AMG Scientist
Posts: 702
Joined: Mon Mar 12, 2012 12:09 pm
CITY: Atlanta
COUNTRY: USA
Vehicle/s owned: 1984 W126 500SEL AMG
1985 W126 500SEC AMG Widebody
2009 W211 E63 AMG
Location: Atlanta, Georgia

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by AMG5PT4 »

I just like all the attention our cars are getting now. This week will just add to the surge in attention. It is our job to educate (respectfully) those who want to learn about these special cars, correct inaccuracies and continue to push Mercedes-AMG to celebrate the pre-merger cars.

Flying out tomorrow (Tuesday) AM. Three years of planning and it is finally here.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

There was this SOHC example on Craigslist in San Diego not long ago.
You do not have the required permissions to view the files attached to this post.
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

Take a look at this wide body. This is what I consider the "authentic" look a Gen 2 560 wide body should have. If it is a fake, then it was done very well with parts close to AMG spec, which is laughable these days to obtain apart from a donor car.

It just looks right. It flows right. It gets the right fluids flowing.

This white one? Pssshhhhh.

Image
bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

48hp wrote:There was this SOHC example on Craigslist in San Diego not long ago.
A JP fake shipped out here based on an euro 560SEC. What gave that car away was the rear bumper amongst other things.

They did bring in a 32V 6.0 wide body that looked nice, legit, and sold excluding CA buyers. That car's sale got them hooked on the C126 wide body bringing in the fake 199 SEC, and the Smoke 6.0 wide body.

However the left front end to me, in the pic at least sustained a bump at some point. See the different balance between both front fenders. Still a nice car to own.

Back to Monterey Car Week....looking forward to pics/details of the whole weekend!

Image
Image
Mapearso
AMG Scientist
Posts: 719
Joined: Sat Mar 17, 2012 1:26 pm
CITY: Los Angeles
COUNTRY: United States
Vehicle/s owned: 1988 560SEC Lorinser Clone

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by Mapearso »

by the way..., did anyone notice that the seller is mendelsgarage ...in pennsylvania. I'm guessing this is bruce mendel? i won't comment further other than to say that i agree that the car seems to have a host of issues
AMG5PT4
AMG Scientist
Posts: 702
Joined: Mon Mar 12, 2012 12:09 pm
CITY: Atlanta
COUNTRY: USA
Vehicle/s owned: 1984 W126 500SEL AMG
1985 W126 500SEC AMG Widebody
2009 W211 E63 AMG
Location: Atlanta, Georgia

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by AMG5PT4 »

Coincidence - not Bruce Mendel. I thought the same thing.
User avatar
48hp
Site Admin
Posts: 3982
Joined: Wed Feb 29, 2012 10:08 pm
CITY: Los Angeles
STATE: California
COUNTRY: USA
Vehicle/s owned: 500SEC 32V AMG Wide Body - 500SEC 16V AMG Slim Body
Location: Los Angeles, California
Contact:

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by 48hp »

bondavi
AMG Scientist
Posts: 577
Joined: Sat Mar 17, 2012 1:57 am
CITY: Sacramento, CA
COUNTRY: USA
Vehicle/s owned: 84 500SECAMG
85 500SEL
86 560SEL 6L AMG
87 560SEC RENNtch
91 560SEC
92 400E 6L RENNtch
05 E55
07 E63

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by bondavi »

price is about the same as Mario's Canadian white 5.6 2V widebody.

For someone with $140k to spend, it is a bit of a crapshoot - a well documented and pristine 2v, or a 4v a bit rough around the edges such as this one.
Peter72
AMG Specialist
Posts: 355
Joined: Sat Mar 30, 2013 9:10 am
CITY: Paris
COUNTRY: Fr
Vehicle/s owned: E500
560 SEC AMG

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by Peter72 »

I assume this white wide body is from Japan ?
thecarshrink
Classic Voyeur
Posts: 1
Joined: Sat Apr 06, 2019 2:40 pm
CITY: Los Angeles
COUNTRY: United States
Vehicle/s owned: No current amgs yet

Re: 1986 Mercedes-Benz SEC AMG hammer 6.0 DOHC Widebody

Post by thecarshrink »

bondavi wrote:Take a look at this wide body. This is what I consider the "authentic" look a Gen 2 560 wide body should have. If it is a fake, then it was done very well with parts close to AMG spec, which is laughable these days to obtain apart from a donor car.

It just looks right. It flows right. It gets the right fluids flowing.

This white one? Pssshhhhh.

Image


That black one is as real as they come. I know the car the owner & the seller. As good as they come!
Post Reply